Tyco Thermal Controls Raychem ( Tyco Electronics Raychem GmbH Raychem HTS )
Homepage:
Tyco Thermal Controls Raychem
( Tyco Electronics
Raychem GmbH Raychem HTS )
Saving made easy:
Save with the EURO:
Approx. 2% price saving:
DM divided by 2 = the
new EURO prices
[Conditions of sale and delivery] [PriceList] [Picture-PriceList as word.doc] [Look at Set-Offer] [Detailed product information Laying tips]
Question@soldron.de
please phone the following
number if you have any questions:
NB:
There is no charge for
postage and packing
on orders of EUR 500
or more.
Please note the full product information
at the bottom left.
All prices include VAT.
Please select a product category in the top bar.
To order, click the product name in the dark blue display and
select the product category to the right. Select the products by using
the "Order" button. The products are then automatically transferred to
the fax order menu at the bottom left, which you can print and then fax
or send by post. It is easiest, of course, to order
by eMail:
Important and interesting - please read:
The ideal room heating
| Block-type thermal power generation:
Please read carefully - important for understanding floor heating: |
The benefits of the 3-wire heating mat:
laying of the heating mat (animated sequence), timed heating of the floor (table), electricity consumption (cost calculation), please Click Here: |
In each bathroom: 200 Watt 1m²
with 531 Instset thermostat including delivery, from EUR 179.80
| The anti-chill
floor system:
From EUR 63.80 for 1m²
- 2 metre lengths |
* 2 standard widths 0.3m & 0.5m
* With PE lead (wire mesh coating, shielding) * High quality * Comes complete with thermostat & sensor protection tube * With Laying
instructions & Electrical connections diagram |
Programme free
of charge: 
PDF format
Download: To save the information in a compact form or to print it - click the appropriate "Info" button to the right: For Word 6.0 please click here: |
Click: 
-
-
Word documents |
Still unsure? Still some remaining questions?
EASY FINDER How? Where? What? & Why?
FAQ Questions & Answers:
Find the ideal underfloor heating
mat and thermostat for your own particular application:
Heating in the bathroom, conservatory, living room or any other
room. Click here:
| Assembly and Instructions:
|
Montage- et Mode d'emploi: |
Feedback:Comments and opinions from customers about Soldron.
| Applicationn areas
for heating system: * Tiled stove heating 500 Watt/m² * Bathrooms and kitchens * Selling areas, e.g. butchers * Offices, wall heating, marble heating * For low floor heights * Aesthetic reasons (no radiators) * Renovation of old buildings (e.g. dry floors) * Partial floor heating for seating area * Conservatory anti-chill (frost protection) |
Benefits &of the
underfloor heating system: * Quick and easy to lay * Rapid heating to desired temperature (bathroom in morning) * Controlled by timer thermostat * Extremely thin heating mats, 2 mm, 3 mm and 4 mm thick * CE safety mark, low-cost, maintenance-free * Conforms to international standards VDE, SEV, ÖEV, NEMKO, * SEMKO, below IRPA limits etc. * Warm feet, cool head * Pleasant house temperature * Lower temperature possible through high heat radiation |
Bear in mind that once you have laid tiles or other flooring types it is no longer possible to install underfloor heating or anti-chill mats.
Test your bathroom floor. How does it feel?
Cool and uncomfortable?
But there is a solution.
Plan for the future!
With prices starting at under EUR 50/m² from
2 m², maybe you too should consider treating yourself to this added
comfort!
In conjunction with an Eberle timer thermostat programmed
to match your precise needs, costs are kept
low!
The high quality heating mats:
With 4m cold lead (can be shortened or extended):
electric underfloor heating instead of a standing or a wall-mounted convector
heater
| Specially designed for quick and simple
laying in the bathroom, the rapid and powerful WT3L with 160 Watt/m² output. Possibly in combination with a rapid heater. All 3 cold lead connection cables are on one side.
The heating wire forms a complete loop in the heating cable; this makes laying simpler as the other end of the cold lead cable does not need to be fed back to the start point. The magnetic fields cancel
each other out! The WT3L has a very low profile of just 3mm to 3.5mm. Heating mats with cotton mesh can be compressed lengthways if necessary. |
WT3L electric UnderFloor Heating
|
| If the installation
height must be kept to a minimum
FH TWIN- Protection class II - VDE - GS
Simple to lay:
|
FH TWIN thin-bed under
tile heating mat 
UnderFloor Heating
Special manufacture 160 W/m²: FH TWINprotection class I - VDE - GS All 3 cold lead connection cables are on one side. Any areas are possible, e.g.
Please fax us your floor layout plan Price +200% extra charge for 1m², 10% reduced extra charge on FHT prices for each additional square metre minus special discount, e.g. set discount e.g. for 1m², instead of EUR 69.80 + 200%, EUR 209.40 7m² instead of EUR 406.00 + 130% then EUR 933.80 |
| The benefits of the 3-wire heating
mat: laying of the heating mat (animated sequence), timed heating of the floor (table), electricity consumption (cost calculation), please Click Here: |
Like warm wave heating |
New R-FH-Twin T2 QuickNet Underfloor
Heating:
Electric thin-bed heating
| If the installation
height must be kept to a minimum
R-FH TWIN T2 QuickNet- Protection class II - VDE - GS
Simple to lay: The heating wire forms a complete loop in the heating
cable; this makes laying simpler as the other end of the cold lead cable
does not need to be fed back to the start point.
The magnetic fields cancel each other out! The electric field
is screened by the protective wire coating.
0.5m width
|
T2 QuickNet thin-bed heating mat UnderFloor Heating
|
Electric under floor heating also possible, low voltage tile heating
36 V
|
WTN underfloor heating
FH thin-bed heating mat
WTEPB - sanitation room undertile heating:
|
Electric thin-bed heating
| FH 100 thin-bed heating
mat specially designed for large areas, anti-chill From 10m², 12,14,16,18 -20m² 0.5m wide FH thin bed heating mat protection class I VDE - GS
Simple to lay:
|
FH 100 thin-bed heating mat
|
| Specially designed for conservatories
or for bathrooms in older buildings with poor thermal insulation beneath
the sub floor or where the sub floor is thicker than 4cm. For the thrifty-minded - the extremely low-cost and high-performance THERMOFLOOR S or at160 Watt/m² or 200 Watt/m². The durable PVC coating gives
added strength when laying e.g. on sub floor. |
TFS undertile heating, natural stone heating e.g. in conservatory
|
New - without semi-flexible
adhesive Laminate-heating, parquet heating :
Electric laminate/parquet heating
| AL-T Simply
lay the AL-T on the temperature-resistant sound insulation sheet before
fitting the decking itself (laminate or parquet). Then lay the decking directly on top of the heating element. AL-T Laminate/parquet heating
mat 150 Watt/m². The durable PVC coating gives
added strength. With 4m cold lead (can be shortened or extended): The magnetic fields cancel
each other out!
|
AL-T The high-comfort solution for floor types such as laminate or parquet |
Electric mirror heating
| ABSH The ideal solution to combat condensation on mirrors, e.g. in the bathroom or shower ABSH 50 0.45m x 0.50m
50 or 110 Watt/m². Very low cost, simple to fit
and extremely effective
|
AL-T The high-comfort solution for floor types such as laminate or parquet |
Floor heating, electric heating technology
| Specially designed for:
Also for conservatories (where no thermal insulation beneath), and outdoor areas (to keep free of snow and ice), or for bathrooms in older buildings with no thermal insulation beneath the sub floor or where the sub floor is thicker than 5cm. The equally low-cost yet high-power TF/R 3-L at300 Watt/m². Please phone for details. The durable PVC coating gives
added strength.
|
|
For all heating mats: VDE-EMC 
The heating wires are totally insulated and also feature special screening (in the form of a wire mesh, similar to a co-axial TV cable). It is also earthed and enclosed in a protective coat, making it FI-compatible! |
| The ideal gift When sitting in front of
the computer in the cellar
Fireplace bench heating
Office heating mat
0.4m x 0.6m 75 Watt 0.5m x 0.7m 65 Watt or Heated rubber mat
Heated carpet underlay
|
More info
|
|
Soldron heating regulator Dimmer Socket dimmer N2003S : The high-power heating power regulator for foot & office
heating mats and especially for the WTU 480 underlay heating system
Simply plug between the socket and heating mat and turn the
dial to adjust the heating power to suit your own personal comfort level. Switching power: powerful 2000 Watt for ohmic appliances such
as heating mats, halogen lamps, spot lamps. For infinite setting,
regulating or controlling
|
More info
|
The benefits of the 3-wire heating mat: Laying the heating mat (animated sequence). Timed heating of floor (table), Electricity consumption (cost calculation),
Find a low-cost power provider (Germany): http://stromtabelle.de/rechner.htm
|
A brief example to explain electricity
consumption costs! bathroom heating: At a power cost of approx. € 0.15/kWh and a heating period of 30 minutes for taking the chill off the bathroom floor, this would result in total output of 600 Watt/unit, i.e. 4.5 cents per day. The heating mats must first use all their power to warm up the cold
sub floor and the tiles to 27°C. In this case, the system would probably
heat for the entire duration. (Warm-up)
Second example: We assume that the living room is heated to a temperature of 22°C
by a different heating source, and that the floor is warmed to 24°C.
|
Brand name regulator from Eberle
Mounted types:
| AP mounted thermostat for electric under floor heating and anti-chill systems. The floor temperature is measured by the NTC sensor and regulated by means of the EB 52521/31 electronic thermostat. The sensor of the thermostat is laid in the floor beneath the heating wires in the sensor protection tube, directly beneath the heating layer. The floor temperature can be set on the thermostat to meet your personal requirements and those of the particular room (living room or bathroom) .At 120 Watt/m² 27m² possible
|
Simplicity itself:
but switches a powerful 16 Amps simply set the temperature turn on or off EB 52531 |
| AP mounted thermostat for electric under floor heating under tile heating and anti-chill systems. No loss of comfort or convenience but highly economical because timed operation is ensured by the special EASY 3 ft timer thermostat.
The unit should be set so that the heating is automatically switched on 30
minutes before use by the electronic thermostat. The unit switches off again automatically
during or after use, preventing
any unnecessary heating. You can also switch the heating
on and off outside the times set on the timer, of course.
At 120 Watt/m² 27m² possible
|
Simple operation:
Daily timer thermostat with switch rider simply set the temperature and turn on or off, or use the timer EB EASY 3 ft
EB 52527 (old) |
Embedded models:
| New:
EB 52535 Instant 8 thermostat No loss of comfort or convenience but highly economical because timed operation is ensured by the special EB 52535 FRe Instat 8timer thermostat. The unit should be set so that the heating is automatically switched on 30 minutes before use by the electronic thermostat. The unit switches off again automatically during or after use, preventing any unnecessary heating. You can also switch the heating on and off outside the times set on the timer, of course. At 8 Amps, only smaller areas are possible. Wide range of setting options, please read carefully! Features:
|
The low-cost all-rounder: Daily/weekly timer (programs) With the advantage of being able to switch from floor to room temperature thermostat (floor temperature limited to programmed value) Wide range of settings available! EB 52535 INSTAT8 To detailed description and assembly/operating instructions
for INSTAT8: Wiring: INSTAT8 Assembly and operating instructions in WORD95 format: or Technical Specifications in PDF format: Assembly and operating instructions in PDF format:
|
EB 52512 thermostat for electric under tile heating and anti-chill systems. No loss of comfort or convenience, yet highly economical because timed operation is ensured by the EB FRe 52512 timer thermostat. The unit should be set so that the heating is automatically switched on 30 minutes before use by the electronic thermostat. The unit switches off again automatically during or after use, preventing any unnecessary heating. You can also switch the heating on and off outside the times set on the timer, of course. At 120 Watt/m² 20m² possible
|
The balanced system
- easy to operate: Daily timer thermostat Weekly timer
thermostat Simply set the temperature and turn on or off, or use the timer To detailed description and assembly/operating instructions for EB 52512: Wiring: EB 52512 |
| EB F2A thermostat for electric underfloor heating and anti-chill systems. The floor temperature is measured by the NTC sensor and regulated by means of the EB F2A electronic thermostat. The sensor of the thermostat is laid in the floor beneath the heating wires in the sensor protection tube, directly beneath the heating layer. The floor temperature can be set on the thermostat to meet your personal requirements and those of the particular room (living room or bathroom) .At 120 Watt/m² 30m² possible
Range confinement in setting button |
Simple operation:
simply set the temperature and turn on or off EB F2A oder
|
| EB F2T thermostat with
timer for electric under floor heating and anti-chill systems. The floor temperature is measured by the NTC sensor and regulated by means of the EB F2T electronic thermostat. The sensor of the thermostat is laid in the floor beneath the heating wires in the sensor protection tube, directly beneath the heating layer. The floor temperature can be set on the thermostat to meet your personal requirements and those of the particular room (living room or bathroom) .At 120 Watt/m² 30m² possible
Range confinement in setting button |
Simple operation:
simply set the temperature and turn on or off EB F2T &Timer Function
oder
|
| OJ OCC2D2 thermostat or electrical underfloor heating and under tile heating systems or room temperature thermostat for electrical floor heating No loss of comfort or convenience but highly economical because timed operation is ensured by the special OJ OCC2D2timer thermostat. The unit should be set so that the heating is automatically switched on 30 minutes before use by the electronic thermostat. The unit switches off again automatically during or after use, preventing any unnecessary heating. You can also switch the heating on and off outside the times set on the timer, of course. .At 120 Watt/m² 30m² possible
Range confinement in setting button |
Simple operation:
Daily/weekly timer (programs) With the advantage of being able to switch from floor to room temperature thermostat (floor temperature limited to programmed value) Wide range of settings available! oder
|
| OJ OTN thermostat for electric under floor heating and anti-chill systems. The floor temperature is measured by the NTC sensor and regulated by means of the OJ OTN F2A electronic thermostat. The sensor of the thermostat is laid in the floor beneath the heating wires in the sensor protection tube, directly beneath the heating layer. The floor temperature can be set on the thermostat to meet your personal requirements and those of the particular room (living room or bathroom) .At 120 Watt/m² 30m² possible
Range confinement in setting button |
Simple operation:
simply set the temperature and turn on or off OJ OTN oder
|
| New:
Raychem TC T2 DigiTemp PLUS°
At 120 Watt/m² 30m² possible
Automatic sensing of
sensor mode (floor or room)
|
Simple operation: Daily/weekly timer (programs) With the advantage of being able to switch from floor to room temperature thermostat (floor temperature limited to programmed value) Wide range of settings available! TC RaychemAmbient and / or Floor SensingT2 DigiTemp PLUS° Timer Thermostatoder 
Tech Data:
User ManualEnglisch, Deutsch, Francais, Nederlands, Norsk, Svenska, Dansk, Soumi, Polski, Russisch: |
| T²FloorTemp
PLUS° thermostat for electrical undertlie heating and floor heating systems or room temperature thermostat for electrical underfloor heating The floor temperature is measured by the NTC sensor and regulated by means of the T²FloorTemp PLUS electronic thermostat. The sensor of the thermostat is laid in the floor beneath the heating wires in the sensor protection tube, directly beneath the heating layer. The floor temperature can be set on the thermostat to meet your personal requirements and those of the particular room (living room or bathroom) .At 120 Watt/m² 25m² possible
|
Simple operation: simply set the temperature and turn on or off TA RaychemAmbient or Floor SensingT2 FloorTemp Plus° Comfort Thermostat
oder
Tech Data:
|
New: T²FloorTemp thermostat for electrical under floor heating and undertile heating systems or room temperature thermostat for electrical floor heating The floor temperature is measured by the NTC sensor and regulated by means of the T²FloorTemp electronic thermostat. The sensor of the thermostat is laid in the floor beneath the heating wires in the sensor protection tube, directly beneath the heating layer. The floor temperature can be set on the thermostat to meet your personal requirements and those of the particular room (living room or bathroom) .At 120 Watt/m² 30m² possible
Range confinement in setting button
|
Simple operation:
simply set the temperature and turn on or off T²FLOORTEMP
To detailed description and assembly/operating instructions for T²FLOORTEMP: Wiring: T2 or
|
Into the sub-distributor:
Regulator for carrier rail mounting EB ITS & EB ITU on request:
| Relay component 16 A: Relay component 16 A, coil voltage 220 V, 50 Hz Ideal for installation in the 100 x 100 embedded junction box to
which the heating mats Not available until November at the earliest!
Further information on connections etc. Click here:
|
|
Further sites on this topic in the
Internet
DIY
stores (questions and answers)
Laying tiles and boards
Laying floor tiles
Please note the full product information
at the bottom left.
All prices include VAT.
To order, click the product name in the dark blue display and select the product category to the right. Select the products by using the "Order" button. The products are then automatically transferred to the fax order menu at the bottom left, which you can print and then fax or send by post.
[Conditions of sale and delivery] [PriceList] [Picture-PriceList as word.doc] [Look at Set-Offer] [Detailed product information Laying tips]
Please read carefully - important for understanding under floor heating:
If 160 Watt/m² floor heating is fitted in a room with floor tiles, the heating only consumes 160 Watt/m² during the warm-up period, e.g. from 18°C to the target floor temperature of 24°C.
At 160 Watt/m² rating this is of course correspondingly faster than 120 Watt/m² - and you save time in the warm-up phase.
Subsequently the floor heating, i.e. from the surface of the floor tiles, only releases approx. 10 Watt/m² heating power into the room for each degree Celsius warmer than the room itself.
Roughly half of the heat is released into the room in the form of infrared heat, i.e. radiant heat.
If the temperature in the room is 22°C and the floor is 24°C, the floor heating would then only release 20 Watt/m² into the room.
If the room is warmed e.g. by the sun to 24°C, the floor heating will release no more heat at all into the room and therefore not consume any more electricity. This is the self-regulation effect of floor heating."
The high percentage of radiant heat in underfloor heating means that the room temperature can easily be turned down by several degrees to e.g. 20°C, and it will still be perceived as pleasantly warm.
A floor temperature of 21°C is felt as warm (the emphasis here is on the feeling of comfort created by under floor heating - the prime source of heating is e.g. radiators).
In this case the floor heating would only release 10 Watt/m² into the room.
With a heating area of e.g. 10 m² and a rating of
10 Watt/m² this would result in electricity costs of 15 cents for
10 hours at a price of 15 cents/kHz.
This assumes adequate thermal insulation beneath
the floor base.
In an extreme case, a 160 Watt/m² floor heating system would heat a room from 20°C to 36°C (i.e. one degree per 10 Watts) if it were not limited by the thermostat to approx. 28-29°C.
If the floor plate is thick enough, e.g. 8cm (e.g. heating base from Knauf) and if the customer has access to suitably low-cost storage heating electricity, it is also possible to heat an entire apartment or individual rooms with night storage underfloor heating. The investment costs are relatively low. If the intention is to use the underfloor system as the main source of heating, it is important to use low-cost night storage current.
The consumption costs: i.e. one litre of heating oil
provides 10kW/h of chemical energy although only 80-90% is actually used
as heat in the flat (boiler, radiation and chimney losses). In the case
of electricity, however, 100% is given up to the floor surface. And there
are no costs for chimney sweeps, boiler maintenance or fume emission measurement.
| Important note:
To all people undertaking building and renovation work - reduce your heating
costs!
BKHW: Block-type thermal power generation Instead of oil or gas heating - use a block-type thermal generation system: it makes economic and ecological sense! Generate your own electrical current! Consume electricity which you have generated yourself and reclaim the oil and ecology taxes for the heating cost consumption! EUR 6 back on every litre! Feed your excess electricity back into the public grid and get extra moneyfor your heating cost budget. Interested in more information? |
| If you are satisfied with the quantity and quality of the information in this website please send us a short email letting us know your opinion! | Click here:Question@soldron.de
If you have any questions please give your telephone number: soldroN even in the evenings |
The low-cost temperature maintaining
and frost protection systems
Pipe heat tracing systems
Frost protection band from Tyco Raychem
| System OTB Self-regulating frost protection system for oil tanks and oil pipes |
System HWAT-Plus Hot water temperature maintenance |
System WinterGard Self-regulating frost protection system for pipes |
System EisStop Self-regulating frost protection system gutters and downpipes |
| System TraceTek | System ViaGard Ramps, paths Free of snow and ice |
System AutoSol Self-regulating floor heating system |
Assembly instructions |
Heating technology: Self-regulating, self-limiting heating bands
Hot-water co-heating
The new HWAT-Plus system was developed specially to meet international
requirements. It
is directly available on opening the hot water tap. The economical,
reliable and space-saving solution for
new buildings and redevelopment.
Ensure gutters stay free of ice during the winter
To prevent danger and damage caused by snow and ice on gutters
and drain pipes. The EisStop system is simple to
fit and has a robust design.
Frost protection and temperature maintenance for pipes.
The WinterGard system can be used in all areas to provide proven
and reliable frost protection for pipes, e.g. for
cold water pipes, drain pipes, heating and fire extinguisher
pipes
Heating of oil pipes and oil tanks
The ingeniously simple solution prevents heating systems from
seizing up. Put an end to blocked oil pipes and congealed oil tanks
in the winter with the OTB system.
No more shovelling during the winter
Ice and snow on ramps, paths, steps and clarifying tanks often
lead unnecessarily to dangerous situations
. Reliability even during bad weather is what distinguishes the
durable ViaGard system for outdoor surface heating.
Comfort wherever you walk
The floor heating generates cosy and pleasantly warm floors in
the kitchen, bathroom, sauna and wherever
marble, ceramic or mosaic tiles are laid. The ready-to-use kit
is laid directly on the sub-floor or in the mortar bed.
Our products:
Raychem System-HWAT-Plus, Raychem System-WinterGard, Raychem Syst
Filter collector: FS
|
The rainwater from the gutter flowing into
the drainpipe is first filtered through the vertical stainless steel
filter insert, is collected in the storage space and then fed to the rainwater
barrel via the outlet. The unique construction separates out any dirt (larger
than 0.44 mm) and automatically washes this into the drain with the rest
of the rainwater. Over 90% of the water arriving in the filter collector
is filtered and collected based on this principle. The open sections of
the gutter drain remain open throughout. There are no constricted parts
in the unit's sections behind which rainwater can build up. This is particularly
important during heavy rain when large quantities of water flow through.
In such cases 50% of filtered water is still fed to the rainwater barrel.
Any excess rainwater is channelled directly to the drainpipe. The anti-corrosion and frost resistance properties are guaranteed. The compact construction makes assembly in almost all rainwater drainpipes simple and easy. The filter collector and drainpipe filter collectors from WISY AG come in various versions: the housing of the WISY filter collector can be made from stainless steel, zinc or copper in the rated width (DN) 100, 87, 80 and 76. The filter insert is always made from stainless steel. The casing and the filter insert of the drainpipe filter collector are always made from stainless steel. The rainwater from the gutter flowing into the drainpipe is first filtered through the vertical stainless steel filter insert using adhesive force, is collected in the storage space and then fed to the rainwater barrel via the outlet (DN 50) to the tank. Further information: |
|
The unique construction (German patent 3812136) separates out all coarse and fine dirt (larger than 0.28 mm) and automatically washes this into the drain with the rest of the rainwater. Over 90% (efficiency) of the water arriving in the filter collector is filtered and collected based on this principle. The open sections of the gutter drain remain open throughout. There are no constricted parts in the unit's sections behind which rainwater can build up. This is particularly important during downpours when large quantities of water flow through. Any excess rainwater is channelled directly to the drainpipe. The anti-corrosion and frost resistance properties are guaranteed. The compact construction makes assembly in almost all rainwater drainpipes simple and easy. Using a dummy insert it is possible to stop the collection and filtering process. The gutter rainwater then flows directly into the drainpipe. (deactivation of rainwater system). |
http://www.soldron.de/titeleng.htm in english
The background music is theChe-Guevara-Landler
(composed by Christoph Well from the popular Bavarian band "Biermoesl-blosn")
as a midi sequence.
|
|
|
|
